ZCM hydraulic transmission s made up of hydraulic motor, multi-disc friction braker and planet gearboxdecelerator, Having Characteristics of small, light, large torque, high start and transmission efficiencylow noise, etc. Output shaft can bear large radial force, Hydraulic transmission can be applied in kindsof hydraulic transmission system and rotating facilities.
Displacement Range:728-24047 ml/r
Torque Range:1000-38000 Nm
Speed Range:0.3-60 r/min
Brake Torque:1660-87584 Nm
Ratio Of Gearbox:4.42-486
1. ZCM Hvdraulic transmission
2. Decelerating Grade, 1 is the first deceleration, 2 is the second deceleration, 3 is the third deceleration, 4 is the fourth deceleration, followed by 03,06,09,12, is the base number Decelerating Grade: 1-one grade.2-two grade, 3-three grade, 4-four grade, Followed by 03,06,09,12, as the base.
3. Rated output torque. Rated output torque
4. Associated motor: Associated motor: B- Cycloidal motor C- five-star motor Radial piston motor D- High piston motor E- Swivelling cylinder motor
5. Installation dimension: Installation Dimension: F- Vertica front flange M- Vertical middle flange R- Vertical retral flange
6. Output Shaft type: H- Standard rectangular spline Standard spline key B- Standard flat key K- involute spline nvolute spline Z-gear
7. nner hydraulic control system (see page 1) nner hydraulic control system (see page 1)
8. Oil inlet and outlet port size (refer to the hydraulic motor oil port size)ports
Example: ZCM1.03-3000/B-F-Z-K3Y says ZCM hydraulic transmission device, one grade planetary gear reducer, rated output torque of 3000N.m,matched Orbit motor, Vertical front flange, gear output, with k3 valve (with two-way balancing valve and a shutle valve), oil inlet and outlet Y (oil portG3/4”drain port M14X1 5)
